Manifold systems and accessories

Starting from a number of 3 geothermal heat probes, the fluid flow from the geothermal heat probes is accumulated in a collector/ manifold system.

GEROTHERM GEROTHERM - manifold/ collector made of PE-HD

Manifold of PE-HD

Manifold made of PE-HD with ball valve as cut-off valve for the individual probe circuits.

Manifold with control valve

Manifold made of PE-HD with control valve SETTER to control the quantities with partial flows of differing sizes.

Different designs of large manifolds

Different designs of large manifolds.

Manifold of premium steel with control valve SETTER

Manifold made of premium steel with ball valve as cut-off valve for the individual probe circuits.

Manifold of premium steel with control valve SETTER

Manifold made of premium steel with control valve SETTER to control the quantities with partial flows of differing sizes.

Anti-freeze agent STÜWASOL L

The anti-freeze agent STÜWASOL L is a long-term frost and corrosion protection concentrate for heat pump systems. The concentrate is rated water pollution class 1 (slightly water polluting).

Pressure pump

After the geothermal heat probe is installed in the substratum, a pressure test is conducted in the system that is required by the law. For this purpose, a test pressure of 6bar is exerted that is allowed to drop 0.2bar at a maximum after a preload time in the test period of 60 minutes.

PE-HD shaft

The manifold/collector system is already integrated in the PE-HD shaft and the shaft can be installed effortlessly due to its low weight. The PE-HD shaft can be manufactured for the necessary number of manifold/collector circuits.